What is the stock tire size for a 3rd gen Toyota Tacoma?

The 3rd gen Tacoma (2016–2023) uses different sizes by trim: SR5 comes with 265/70R16 (30.61" diameter); TRD Off-Road and TRD Sport use 265/70R17 (31.61"); TRD Pro uses 265/65R17 (30.57"); Limited uses 265/60R18 (30.47"). All trims use the same 6×139.7 bolt pattern with a 106.1mm center bore.

Will 33-inch tires fit a Tacoma without a lift?

No — 33-inch tires (approximately 285/75R16 = 33.83" or 285/75R17 = 33.83") require at least a 2–3" lift kit to clear the front fenders at full lock. A 1–2" leveling kit lets you run 265/75R16 (30.86") — the most popular no-big-lift upgrade on TacomaWorld.

What tires fit a Tacoma with a 2-inch lift?

With a 2" lift, most owners run 285/70R17 (32.71") on the TRD or 285/75R16 (33.83") on the SR5. The 285/75 on a 16" wheel is the most popular "33 build" on 2nd and 3rd gen Tacomas — it clears with a 2" lift with no trimming required on most builds.

Are Toyota Tacoma wheels from different generations compatible?

Yes — all Toyota Tacoma generations (1995–2024+) use the same 6×139.7 bolt pattern and 106.1mm center bore. OEM TRD wheels from a 2016 Tacoma will physically bolt onto a 2005 Tacoma and vice versa.

How does a tire size change affect the Tacoma speedometer?

The Tacoma speedometer counts wheel revolutions. A larger tire covers more distance per revolution, so the speedo reads lower than your actual speed. 265/75R16 on SR5 (vs stock 265/70R16) causes −3.2% speedometer error — at an indicated 60 mph you're actually doing 61.9 mph.

Do I need to re-gear my Tacoma after installing bigger tires?

For 33" tires and above, re-gearing is strongly recommended — especially for towing. The stock axle ratio for most V6 Tacomas is 3.91 or 4.10. Going from 265/70R17 to 285/75R17 is a 6.7% diameter increase; most owners choose 4.30 or 4.56 gears. For 35s, 4.56 or 4.88 gears are standard practice.

What is the most popular tire upgrade for the Toyota Tacoma SR5?

The most commonly recommended no-lift upgrade for the 3rd gen SR5 is 265/75R16 on a 16×7.5" wheel with ET15–ET20 offset. This is a +3.2% diameter increase (30.61" to 30.86"), fits with no rubbing, and works with BFGoodrich KO2, Falken Wildpeak AT3W, or Nitto Terra Grappler G2.

What does 265/70R17 mean for a Toyota Tacoma tire?

265 = section width in mm, 70 = aspect ratio (sidewall = 265 × 0.70 = 185.5mm = 7.30"), R = radial, 17 = rim diameter in inches. Overall diameter = (17 × 25.4) + 2 × 185.5 = 802.8mm = 31.61".

What is the bolt pattern for the Toyota Tacoma?

All Toyota Tacoma generations from 1995 to 2024+ use 6×139.7mm (also written as 6×5.5") with a 106.1mm center bore. This pattern is shared with the 4Runner (2003+), FJ Cruiser, Tundra (2000–2006), and Hilux worldwide.

How do I compare tire sizes for the Toyota Tacoma?

Enter your current OEM size in the Stock (A) field and your upgrade size in the New (B) field on the Compare Sizes tab. The calculator shows exact diameter change, speedometer error, and clearance gain. Key thresholds: ±3% = speedo correction recommended; ±7% = re-gearing recommended; ±10%+ = 3"+ lift required.

Toyota Tacoma Tire Size Calculator

See exactly how much lift a bigger tire needs on your Tacoma before you buy — across every generation from 1995 to today.

Quick Answer

3rd gen TRD Off-Road stock 265/70R17 = 31.61″ diameter. The most popular TacomaWorld upgrade — 265/75R16 on the SR5 — hits 30.86″ with no lift (+3.5% vs SR5 stock 265/70R16). Want 33s? 285/75R16 = 33.83″ needs 2–3″ lift. Want 35s? 315/70R17 = 34.36″ needs 3–4″ lift + front diff drop. All bolt to the same 6×139.7 pattern across all Tacoma generations (1995–2024+).

Trim	Stock Size	Diameter	Notes
G2/G3 SR5 (2005–2023)	265/70R16	30.61″	265/75R16 bolt-on upgrade
G3 TRD Off-Road/Sport	265/70R17	31.61″	285/70R17 fits on 2″ lift
G3 TRD Pro	265/65R17	30.57″	Fox suspension equipped
G3 Limited	265/60R18	30.47″	18″ wheel — limit upgrades
G4 TRD Pro/Limited	275/55R20	31.91″	20″ — same bolt pattern
→ 33s upgrade	285/75R16	33.83″	2–3″ lift required

Source: Toyota OEM specs. All generations use 6×139.7 bolt pattern, 106.1mm center bore.

G1 · G2 · G3 · G4

InchesMetric

Decode a Metric Tire Size

Tacoma common sizes — quick load:

Tire Size (e.g. 265/70R17)

OEM Stock Tire Sizes — All Tacoma Generations

1st Gen Tacoma

1995–2004

Bolt: 6×139.7

2nd Gen Tacoma

2005–2015

Bolt: 6×139.7

3rd Gen Tacoma

2016–2023

Bolt: 6×139.7

4th Gen Tacoma

2024–present

Bolt: 6×139.7

How to Use This Calculator

1Select your generation. Choose G1 (1995–2004), G2 (2005–2015), G3 (2016–2023), or G4 (2024+) from the generation cards or use the stock size quick-load buttons.
2Decode your tire size. Click any preset (e.g. 265/70R17) or type a custom size in the Decode Size tab and click Calculate to see diameter, sidewall height, and circumference.
3Compare stock vs upgrade. Enter your stock size in field A and your proposed upgrade in field B on the Compare Sizes tab. Click Compare Sizes to see speedometer error and safety rating.
4Check generation fitment. On the Gen Fitment tab, select your generation and enter a proposed width, aspect, and rim size to get a fender clearance estimate.
5Review the lift guide. Use the Lift Guide tab to see recommended tire sizes for each lift tier (stock through 3–5") for your Tacoma generation.

Tacoma Tire Sizing — Generation-by-Generation Guide

All generations share the same 6×139.7 bolt pattern. G1 (1995–2004), G2 (2005–2015), G3 (2016–2023), and G4 (2024+) all use 6×139.7 with a 106.1mm center bore — OEM TRD wheels are cross-generation compatible.

G3 is the most commonly built generation. Stock sizes range from 265/70R16 (SR5) to 265/70R17 (TRD Off-Road/Sport), 265/65R17 (TRD Pro), and 265/60R18 (Limited). The TacomaWorld consensus: 265/75R16 fits the SR5 bolt-on with no lift; 285/75R16 fits on a 2–3″ lift.

For 33s, expect 2–3″ lift minimum. 285/75R16 (33.83″) or 285/75R17 (33.83″) are the classic "33 builds." Going to 35s (315/70R17 = 34.36″) requires 3–4″ lift plus a front differential drop and re-gearing to 4.88 for the V6.

Re-gearing threshold: ±10% diameter change. For V6 Tacomas with stock 3.91 or 4.10 axle ratios, a 10%+ diameter increase significantly hurts off-road crawl and highway towing. Most builders choose 4.30 gears for 33s and 4.56–4.88 for 35s.

Frequently Asked Questions

Related Vehicle Tire Size Calculators

F-150 Tire Size Calculator Jeep Tire Size Calculator BMW Tire Calculator Audi Tire Size Calculator

Back to All Vehicle Tire Size Calculators All Calculators